Rubber Endpin Cover (non-threaded) for 1/2" Kay or Engelhardt Endpin (OEM)
- Small Accessory:
- This item ships FREE in a cart totaling $50 or more
Bulk discount rates
Buy in Quantity and SAVE!
|Buy 5 or above||and get $0.75 off each item|
This endpin tip is sized to fit 1/2" endpins. It is a slip-on tip, made of black rubber, and will fit the endpins that were commonly used on Engelhardt and Kay Basses, like the one shown in the photo.
These rubber tips were aquired from Engelhardt when they closed in 2019; they are the OEM covers that were supplied on the bass endpins as delivered from the factory.
These are a general-duty caps; they do not have inserts. I suggest reversing the endpin in the socket (when possible) to lengthen their useful life. By doing so, you are not driving the pointy end through the rubber, but are rather putting a less destructive rounded end into the cap. Smart move!
Please measure your endpin to ensure fitment. An easy way to measure is to use an open-ended 1/2-inch wrench; if it fits around the endpin, so will the cap. That said, if you have a Kay or Engelhardt, and your endpin looks just like the one shown in the photos above, you can be fairly sure that this is going to fit.