D Addario

Takeoff set - OEM NS Electric Contemporary for NS Design Electric Upright Basses NS610

(No reviews yet) Write a Review

We ship worldwide! (Read this)

To all 50 US States
On Sale
  • NS Electric Contemporary for NS Design Electric Upright Basses NS610
  • NS Electric Contemporary for NS Design Electric Upright Basses NS610
Special Price: $70.00
Regular Price $143.00

Price shown may adjust with options selected below (if applicable)


Allergy Advisory: Product Contains Nickel

Important: These strings are "take-offs" - which means that they are strings that had been installed on a brand new NS Design electric upright bass from the factory. They were removed and replaced by a different string set requested by the customer who bought the bass they were installed on. So they are "used" - meaning that they have been trimmed and installed on a bass - but other than the play-testing done at NS Design when first installed, they have not been "played." So they're in "like new" condition but have previously been trimmed for length and installed on an NS Design bass.

Note: These strings are specially designed specifically to fit the NS Design Basses (NXT, CR, EU and WAV4 models). They are too short to fit a regular upright bass, and may not have the right dimensions to fit other electric upright basses. Contact us if you would like to verify dimensions of these strings vs. your bass before ordering for a different EUB.

The NS Electric line was developed as a joint effort between Ned Steinberger and D'Addario Strings. Because volume is unlimited for electric instruments, NS Electric line focuses on tone and expressive nuance rather than acoustic power. It brings out the richest tone from any electric instrument, and work well for acoustic instruments when subtlety of expression is paramount.

NS Strings are mostly made with stranded steel cores wrapped with aluminum, brass, tungsten, nickel, and stainless steel. The line is designed for use with electric upright basses using NS Standard Double Bass string length.

D'Addario's NS Helicore Contemporary Double Bass set produces a brighter sound, and features a lower tension feel. They are similar or identical to the stock strings on the NS Design CR4M and CR5M basses. They were previously sold as the "NSFL-Flatwound Light" set and have recently undergone a packaging and name change. A little brighter and "zingier," not as traditional in sound, for that "Crossover" vibe. They have a more electric-sounding (longer) sustain character than the "traditional" set.

All NS Double Bass strings are designed to fit NS Double Basses and NSDB-Standard instruments : 46.5" wound length, 54" overall string length.

Strings are sold as sets; D'Addario sells the strings in 4-string sets, with high C and low B strings to complete sets for extended-range instruments.

Also note that the NS Design CR, NXT and WAV4 basses are designed to accommodate full (3/4) size upright bass strings, using the wrap-around bottom surface and keyhole string anchor slots on the back of the instrument - so if none of these stock strings are your cup of tea, you're not married to them; you can consider other options from our regular string selection!

Which strings do you have?

Oddly enough, the Contemporary and Traditional string sets BOTH have Gold/Blue/Gold silks at the ball end (with gold stripes over the blue), and both have the multi-colored D'Addario silks in the pegbox to indicate each string position (the ones in my photo to the right are both "G" strings, which are red at the pegbox end.)

How can you tell the difference between the two sets?

Here's how: the difference (aside from string diameter - the Contemporary strings are a light gauge) is in the ball end - the Contemporary strings have a smaller, electric-bass-style ball end with a hole in the middle, while the Traditionals have the same ball end used on Helicore upright bass string sets, which is a solid cylinder (no hole).
"Contemporary" Set String Gauges:
  • E: 0.092
  • A: 0.068
  • D: 0.052
  • G: 0.048
  • High C: 0.034
  • Low B: 0.125

View AllClose

Warranty Information

I've experienced a problem with a string (or set of strings). What should I do?

We are sorry to hear of your experience. If you experience a problem with your strings (or string set), you may contact us (D'Addario) to see whether a manufacturing mishap is the cause. If you wish to return the string(s), visit Please return the string or set in question in its original packaging (including corrosion intercept bag if possible). This will help us determine if a defect or other malfunction has occurred. Upon receipt and evaluation, if a manufacturing defect is revealed, we will quickly send you a replacement.

NOTE: Though it may not be the case in your situation, please keep in mind that premature string breakage is often caused by burrs or rough edges that develop at the nut or bridge/saddle. These rough edges are often difficult to see, but can be ruthless on strings. If your string continuously breaks at the nut or bridge, please check these points of contact for a nice, smooth surface. If burrs or rough edges are found, contact your local music shop or luthier to perform the necessary minor repair to resolve this common problem.
View AllClose