NS Design

NS Design WAV Series Full Size Electric Upright Basses (WAVc)

(9 reviews) Write a Review

We ship worldwide! (Read this)

To Continental US (Lower 48)
  • NS Design Electric Upright Basses - Full Size Bass (WAV, NXT, CR), WAV series
  • NS Design Electric Upright Basses - Full Size Bass (WAV, NXT, CR),  WAV bridge
  • NS Design WAV Series Full Size Electric Upright Basses (WAVc)
  • NS Design WAV Series Full Size Electric Upright Basses (WAVc)
Our Low Price: $1,479.00

Price shown may adjust with options selected below (if applicable)


Full Scale • 4 and 5 String (WAV4c, WAV5c)

As you may already know, the NS Design Electric String Instruments have a long history. Their electric upright basses have been made and refined for decades, and are in the hands of famous (and not-so-famous) players all over the globe. Beautifully crafted, with a distinctive shape that is instantly recognizable, the basses are sure to impress.

The "c" in the model indicates that it is the newest version of these instruments, with the Coform fingerboard. Earlier models had black rosewood, which can no longer be used due to restrictions - but the Coform is a big improvement; a very wood-like finish, resonance and feel, but with a very stable, non-twisting/non-warping material that will outlast most natural wood products.

NS Design makes several distinct "grades" of their instruments.

Includes our exclusive Gollihur Music tipsheet to get the most out of your purchaseHere is a quick description of the functional differences between the three grades of bass.

  • CR Bass: The CR series are their top-line version made in the Czech Republic, at a dedicated facility. It is available in standard transparent amber finish over solid top. Other custom finishes are available by special order. Includes heavy-duty, more adjustable tripod stand. German-made Schaller tuning machines. Adds active EMG-made magnetic pickups to the Polar Pickup. Active electronics (Volume, Bass, Treble, Pickup Blend, Polar Mode Blend). Outstanding fit and finish.

  • NXTa Bass: The NXT series are made in the same facility as the CR, but with more common woods and components, and simpler electronics. It is available in Amber Burst and Trans Black semi-gloss finish. Features a veneer figured top. Includes the same lightweight tripod stand as the WAV model. Asian-made tuning machines. Active electronics circuit includes a flash-rechargeable buffer circuit for optimal use with a wider range of amplifiers; can be bypassed for passive mode. Passive treble roll-off, and volume controls, and Polar Pickup switch (to change between arco and pizz mode). Notably better fit and finish than the WAV series.

  • WAV Bass (This Page): The WAV series provides another option at a remarkably low price, high quality instruments made - to Ned Steinberger's strict quality standards - in Asia. It is available in four colors (Transparent Red, Amber Burst, Piano Black, Gloss White). Features a veneer flame (or opaque) top and gloss finish. Includes lightweight tripod stand. Asian-made tuning machines. Passive electronics (treble roll-off, volume) and Polar Pickup switch (to change between arco and pizz mode). Its high impedance output requires an amp or preamp with 1-10 megohm input impedance for the best sound (will work with any bass amp). Very nice fit and finish.

All models are available in 4 and 5 string options. Each of the models features easy adjustability, excellent playability, and Ned's timeless design - and all are inspected and set up by the NS Design crew in Maine before they're sent to us. All include a padded gig bag and a tripod stand which securely holds the instrument in playing position. All have the "Polar Pickup" - a piezo-based pickup mated with the bridge with both arco (bowing) and pizzicato (plucking) modes. Every grade of these basses is cross-compatible with the various accessories (stands, strap systems, strings, cases, etc.) However, the CR/EU Stand Conversion Kit, which enables the docking of the Endpin Stand to the CR/EU Tripod Stand, will not work with the NXT/WAV tripod stand (ask us for more info, it can get a little confusing).

The stock strings (Original Equipment on all three models) are a light gauge steel, made by D'Addario (the NS Electric "Contemporary" set) that serve as a reasonably decent hybrid sort of sound, but the instrument responds well and can handle most standard 3/4 size upright bass strings. They also make the NS Electric "Traditional" set, and I and others report good success with strings such as the Pirastro Obligatos, which are a popular, string that delivers a more traditional sound, with less sustain and more body than the stock strings. Keep in mind, however, that the tuning machines are similar to bass guitar tuners, so very heavy gauge strings (like the Eurosonics) typically cannot be accommodated. However, since the pickups are piezo-based, which sense vibration, most any 3/4 size upright bass string can be a candidate, though non-ferrous (magnet-attracting) strings won't get response from the magnetic pickups on the CR-M basses. They designed the rear control cover that allows you route the excess string around the bottom of the bass and anchor them in keyholes to take up the additional length.

WAV Model Bass Specifics

The WAV is the entry-level NS Bass, and I don't think that any other bass at this price point really compares. They've taken the popular design of the CR/NXT basses and had them constructed in Asia using strict quality controls implemented by NS Design, and the basses are then reinspected and adjusted for perfect playability by NS Design staff when they are received in the states.

The well-known and respected Ned Steinberger, designer of the WAV Series (and countless other instruments over the years), commented: "This is the part I love, where we can put a fine instrument in a players' hands at a price that makes them smile."

The basses in the WAV series are full (3/4 size) scale four- and five-string instruments featuring NS Design's proprietary PolarTM piezo pickup system. The WAV4 and WAV5 Bass is available in a choice of FIVE finishes, a transparent Black, Amberburst, Trans Blue, Trans Red, and a "Brilliant White" finish -- which is perfect for those playing in praise bands, with its clean, bright finish -- it looks really sharp in white! Each bass includes a foldable tripod stand and a padded gig bag that will hold the bass, the stand, and also has a pocket for a bow.

The instruments have two transducers beneath the adjustable bridge, and a switch to toggle between them for bowing (arco) and plucking (pizzicato), because the strings vibrate differently under the bow than when plucked. Unlike the CR and EU basses, to keep the price down the system is passive, with just a single volume and tone control. I recommend that you consider a suitable outboard preamp or be conscious of the fact that, like any instrument with a passive piezo-based pickup, some EQ work will be a good idea to shape the tone to your preference.

This is a true electric upright bass, not a fretless bass guitar that you play vertically. The fingerboard is curved, so it can be bowed. While there is a truss rod, there is relief in the fingerboard for typical upright bass style play; if you want very close action for fretless bass guitar style mwah up and down the board, additional fingerboard work may be needed.

A page with comments from Mark, such as what to expect and how to get the best results from it, is included with each bass.


  • LENGTH: 132 cm (52")
  • WEIGHT: 4.8 kg (10.5 lbs.)
  • SCALE LENGTH: 106 cm (41.73")
  • STRINGS: 4 or 5
  • FINISH: Gloss polymer
  • COLORS: beautiful shaded Amberburst, Dark Cherry Transparent, Trans Black, or Brilliant White. The Black, Amberburst and Trans Cherry show off the figured maple veneer tops, and the Brilliant White finish presents a very clean and professional look.
  • BODY/NECK: Maple
  • FINGERBOARD: Coform (a durable, wood-like composite); 43.1mm (1.7") wide at nut; 89.0mm (3.5") max. width. Assymetric relief for easy playability. Inlayed cascading dot markers on face.
  • BRIDGE: Rock maple (dyed black); radius 7.9cm (3.1") string spacing 80 mm (3.14") - adjustable for height
  • NUT: radius 7.9cm (3.1"); string spacing 31mm (1.22")
  • POLAR™ PICKUP SYSTEM: Switch between Arco and Pizz modes; the directional piezo pick-up system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound), with the flick of a switch
  • CONTROLS: passive volume and tone control (treble roll-off), Polar Pickup Switch
  • TRUSS ROD: Powerful rod design provides positive relief adjustment, accessible at nut.
  • TUNING MACHINES: Fully encased worm gear tuners; black finish
  • STRINGS: Light tension flatwound steel strings are standard. Accommodates all NS length strings and most 3/4 scale double bass strings.
  • TRIPOD STAND: (standard) Black, adjustable, standing tripod design. Weight 3.2 kg (7 lbs.)
  • END PIN STAND: (optional) Offers full freedom of movement. Height, tilt and "right bout" angle are fully adjustable providing a more conventional feel. Weight 2.3 kg (5 lbs)
  • SHOULDER STRAP SYSTEM: (optional) guitar style shoulder strap for full mobility
  • GIG BAG: (standard) Padded gig bag with integrated bow pocket, handle and backpack style strap. External pockets for stands and accessories

WAV Model Manual

Need to figure out some of the more in-depth features of this product? Here's a copy of the manual, in PDF format, here.

You may wish to visit the manufacturer's website to see if a more recent version is available.



View AllClose

Warranty Information

NS Design will cover all defects in material and workmanship for five years for the CR Series, three years for the NXT Series, and two years for the WAV series from the date of purchase. We will repair or replace, at our option, any instrument or part thereof which is found by us to be defective. This warranty includes the tuning hardware, electronics, pick-up systems, truss rod, bridge, fingerboard, neck and stand. This warranty does not include replacement of strings or batteries, or wear to potentiometers, the fingerboard, or surface finish. Problems resulting from disassembly, modification, customization, or repair by anyone without prior authorization from NS Design are not covered by this warranty. We assume no liability other than for the actual repair of the instrument to playable condition within our specifications. This is our sole warranty, and it includes all warranties, whether expressed or implied. You may have specific warranty legal rights which vary from state to state.
View AllClose

9 Reviews

  • 5

    Very pleased with my bass!

    Posted by Mike R on Nov 16th 2010

    Mark, many thanks for your help in the purchase of my NXT5. It arrived ahead of schedule and the last part arrived today. I am very pleased with the varity of sounds I am able to get out of the bass. Thanks again for your great customer service.

  • 5

    Outstanding Neck!

    Posted by Luis A on Apr 4th 2010

    I just received my NXT bass today and it is spectacular. What an outstanding neck! Thank you for your effective and expedited support. When I can prepare a weather-controlled room with enough space in my house, I will plan a trip to NJ to see you about a good acoustic bass. Now I have the NS Design bass, so I'm not in much of a hurry. Thanks again...

  • 5

    Exceeds expectations

    Posted by Tony R on Mar 21st 2010

    Hi Mark, I want to offer my deepest and sincerest appreciation for your help in getting my NXT bass to me in time for my New York Trip. It arrived yesterday and exceeds my expectations. It is perfect for my travel needs and I am impressed with the tone and feel of this bass for such a great price. ( I just can't look at the neck because the position marks are a little unnerving) The plastic case is clever and I love that the soft case fits inside. It will make getting in and out of taxi's much easier. Once again, thank you for your help in getting this to me in time and relieving my stress level.

  • 5

    Very pleased

    Posted by Charles R on Feb 6th 2010

    Hey Mark, just wanted to let you know how pleased I am with my purchase. After a couple weeks with my new cr5m I have to take a break because of "beginner blisters"! Again thanks for your advice and help in choosing my new guys will be my bass shop for the rest of my career !

View AllClose