null

Endpins

Endpins

  • Economy Rubber Endpin Point Covers (Caps) for Upright Bass in multiple sizes; 1/2", 10mm (or 3/8") and 8mm.

    Economy Rubber Endpin Point Covers (Caps) for Upright Bass

    Our Low Price: $4.50
    We often get asked for replacement rubber endpin covers for our endpins. For many, the very nice Super Endpin Ball has been a good option - as long as your endpin is 10mm or smaller. But if you have an endpin that it won't fit on, or prefer a simpler,...
    Small Accessory:
    This item ships FREE (USA) in a cart totaling $50 or more
    Our Low Price: $4.50
  • Super Endpin ball attachment for Upright Bass (tip, cover), close up

    Super Endpin ball attachment for Upright Bass (tip, cover)

    Wolf

    Our Low Price: $21.00
    This is a very cool idea -- wish I'd thought of it! This little device is the cure to dreaded "spouse comments about holes in carpet" as well as dirty looks when you spike your bass into somebody's wooden floor. It also will help avoid having your endpin...
    Small Accessory:
    This item ships FREE (USA) in a cart totaling $50 or more
    Our Low Price: $21.00
  • Bob's Rubber Endpin Cover for Kay and Engelhardt Basses

    Bob's Rubber Endpin Cover for Kay and Engelhardt Basses

    Gollihur Music

    Our Low Price: $4.50
    For years, we've hosted an FAQ (in our Resources, see menu above) for Bob's crafty two-piece solution to replace the rubber endpin cap on a Kay or Engelhardt 1/2" endpin. Although we also stock economy rubber endpin caps, some folks need something a lot...
    Small Accessory:
    This item ships FREE (USA) in a cart totaling $50 or more
    Our Low Price: $4.50
  • Screw-On Heavy Duty Rubber Endpin Foot - main view

    Screw-On Heavy Duty Rubber Endpin Foot

    Our Low Price: $10.50
    If you have an endpin with a threaded tip, this is a replacement for your original rubber cap (that might have been lost, worn out, damaged, or otherwise rendered unusable or ineffective.) This little foor/cover/cap - just over 1" in surface diameter at...
    Small Accessory:
    This item ships FREE in a cart totaling $50 or more
    Our Low Price: $10.50
  • Upright Bass Endpin, steel shaft with hardwood plug

    Upright Bass Endpin, steel shaft with hardwood plug

    Our Low Price: $79.00
    This is a very nice endpin, and a worthy replacement for your bass! The shaft is made of a nicely polished SOLID steel, with incremental "divots" spaced an inch apart, so that the brass hardware can securely hold the position without slipping. This...
    FREE SHIPPING:
    To all 50 US States, in a cart over $50
    Our Low Price: $79.00
  • Replacement/Upgrade Thumbscrew - Tightener for Endpin Collar (fits Kay/Engelhardt), with example of stock thumbscrew for comparison

    Replacement/Upgrade Thumbscrew - Tightener for Endpin Collar (fits Kay/Engelhardt)

    Our Low Price: $7.00
    I often hear from folks who have a Kay or Engelhardt with the factory endpin - that big ½" plain steel job with the straight-fit collar. (We sell replacement OEM units that we get directly from Engelhardt if you're looking for a replacement.) A...
    Small Accessory:
    This item ships FREE (USA) in a cart totaling $50 or more
    Our Low Price: $7.00
  • Heavy duty rubber endpin for 12mm upright bass endpin

    Heavy Duty Upright Bass (tip, cover) for 12mm Endpin Shaft (non-threaded)

    Weidler

    Our Low Price: $10.00
    This endpin tip is sized to fit 12mm endpins. It is a slip-on tip, made of dense, long-lasting rubber, and will fit tips that have threaded ends (like the one pictured above) as well as non-threaded ones. It has a metal insert in the bottom to keep the...
    Small Accessory:
    This item ships FREE (USA) in a cart totaling $50 or more
    Our Low Price: $10.00
  • Endpin threaded ball by New Harmony on an endpin

    Screw-On Rubber Endpin Ball (10mm-1.5 threads)

    New Harmony

    Our Low Price: $24.00
    If you have an endpin with a threaded tip, this is a replacement for your original rubber cap (that might have been lost, worn out, damaged, or otherwise rendered unusable or ineffective.) This little sphere - about 1.5" in diameter - is the cure to...
    Small Accessory:
    This item ships FREE in a cart totaling $50 or more
    Our Low Price: $24.00
  • Carbon Fiber Replacement Endpin Assembly for Upright Bass, full view

    Carbon Fiber Replacement Endpin Assembly for Upright Bass

    Our Low Price: $84.00
    Carbon Fiber Upright Bass ENDPINWhy make an endpin of carbon fiber? CF has a high strength-to-weight ratio, while having a much lower density than steel. So this high-quality endpin assembly weighs only 248-250 grams (about 8.8 oz.) and has the strength...
    FREE SHIPPING:
    To all 50 US States
    Our Low Price: $84.00
  • Titanium upgrade endpin - tip with threaded cap

    Solid Titanium Upright Bass Endpin Shaft (10mm)

    Artino

    Our Low Price: $109.00
    Titanium is an excellent material for an endpin; very lightweight and stiff, it won't absorb (and damper) vibrations as easily as denser materials, and will instead allow them to vibrate freely. Upgrading an endpin to a more high-tech material like...
    FREE SHIPPING:
    To all 50 US States
    Our Low Price: $109.00
  • Braided Carbon Fiber Replacement Endpin Assembly for Upright Bass

    Braided Carbon Fiber Replacement Endpin Assembly for Upright Bass

    Glasser

    Our Low Price: $51.00
    Carbon Fiber Upright Bass ENDPINWhy make an endpin of carbon fiber? CF has a high strength-to-weight ratio, while having a much lower density than steel. So this high-quality endpin assembly has the strength and rigidity of a standard steel endpin, which...
    FREE SHIPPING:
    To all 50 US States
    Our Low Price: $51.00
  • Complete Endpin Assembly, 1/2" (for Kay and Engelhardt Basses)

    Complete Endpin Assembly, 1/2" (for Kay and Engelhardt Basses)

    Engelhardt

    Our Low Price: $49.00
    This endpin is the type that was used for most Engelhardt upright basses, and will generally fit most Kay basses (that had metal endpins) as well. If your double bass endpin is rusted, or if the pin is lost, this will be a perfect "OEM" replacement. Two...
    Our Low Price: $49.00